ABS resin
英 [æbz ˈrezɪn]
美 [æbz ˈrezn]
网络 ABS 树脂; ABS树脂; 树脂; 丙烯腈-丁二烯-苯乙烯树脂; 丙烯轻丁二烯苯
双语例句
- The lad was wearing rubber-soled shoes.
这个小伙子穿着橡胶底的鞋子。 - Study conclusion of the relationship between composition and performance is the basis of flame retardant type ABS resin production.
研究了共混物组成与性能之间相互关联，为阻燃-ABS生产提供依据。 - The surface property of inorganic particles is modified by the coupling agent before they are added into the ABS resin.
用硅烷偶联剂将几种常用的无机粒子进行表面处理后与ABS进行共混。 - Effect of Composition of Matrix on Properties of Transparent ABS Resin
基体的组成对透明ABS树脂性能的影响 - A pilot test of reusing washing water of butadiene polymerizer and grafting polymerizer in the production process of ABS resin
ABS树脂装置丁二烯聚合釜及接枝釜洗涤水回用中试研究 - The article discussed the principle and method of the synthesis of the transparent ABS resin, and summarized the trend of the research& development technology in China and abroad in recent years.
文中探讨了透明ABS树脂合成的原理与方法，总结了近年国内外的研究开发技术动向。 - Bulk polymerization of ABS resin ⅱ. Study on prepolymerization kinetics
本体法合成ABS树脂Ⅱ.预聚合反应动力学研究 - Measurement of Glass Transition Temperature of ABS Resin by Modulated Differential Scanning Calorimetry
调制示差扫描量热法测定ABS树脂玻璃化转变温度 - Bulk polymerization of ABS resin ⅰ. Study on phase inversion
本体法合成ABS树脂Ⅰ.相转变过程的研究 - Study on grafting process and processability of the ABS resin
ABS接枝工艺和产品加工性能研究 - Ultra Black Property of Ni-P Coating on ABS Resin by Chemical Plating
ABS树脂的化学镀Ni-P镀层的超黑化性能 - This product mainly used in polyethylene, polyamide, polyester, polyvinyl chloride, ABS resin and all kinds of synthetic rubber and petroleum products, is highly effective to polypropylene.
本产品主要用于聚乙烯、聚酰胺、聚酯、聚氯乙烯、ABS树脂一级各种合成橡胶和石油产品中，对聚丙烯有卓效。 - Research of special polybutadiene rubber latex for sheet ABS resin
板材级ABS树脂专用聚丁二烯胶乳的研究 - Thermal Degradation Behavior of ABS Resin Based on TGA-FTIR Technology
TGA-FTIR联用技术研究ABS树脂热降解行为 - Chinese Production Situation of ABS Resin and its Development Trend
我国ABS树脂生产现状及发展趋势 - A Solution-Reaction Calorimeter and Thermodynamic Properties of Complexes of Rare Earth; Bulk polymerization of ABS resin ⅱ. Study on prepolymerization kinetics
溶解&反应热量仪和稀土配合物的热力学性质本体法合成ABS树脂Ⅱ.预聚合反应动力学研究 - It expounds formula process, performance and development of fire retarding ABS resin.
论述了阻燃ABS树脂的配方工艺、性能和研制。 - Study on ABS Resin Bonded with NR
ABS树脂与天然橡胶粘合的研究 - The technology for ABS production and highly functional ABS resin were discussed. The synthesis of polybutadiene latex and continuous mass process were highlighted. The technical and economic analysis and comparison were also done for each process.
论述了ABS生产技术和高功能化ABS，重点阐述了聚丁二烯胶乳合成技术和连续本体工艺，并对各种生产工艺进行了技术经济分析与比较。 - This paper describes comprehensively the technology of ABS resin production by blending graft ABS powder and AS pearl pellets.
综合叙述了接枝ABS粉料和AS珠粒料树脂掺混生产ABS树脂技术。 - The impact strength of ABS resin could be improved by the addition of SBS or CPE, PVC, or the mixtures of CPE and PVC to the flame retardant system.
在阻燃ABS体系中加入SBS或CPE或PVC以及CPE与PVC的混合物，可以提高ABS树脂的冲击强度； - The optimized control method is applied to the temperature control of ABS resin polymerization reactor process.
本文将该方法应用于ABS树脂聚合反应过程的温度控制中，并对固定增益的迭代过程和用神经网络优化的迭代过程的温度输出进行了比较。 - ABS resin and its intermediate was reinforced by short glass fibers.
以ABS树脂及其中间体为主要原料，利用短玻璃纤维对其进行增强改性。 - The paper reviewed the worldwide production capacity, supply and demand status and consumption structure of acrylonitrile-butadiene-styrene ( ABS) resin, and forecasted its market prospect. Suggestions were presented for developing the industry of ABS resin in China.
综述了国内外丙烯腈-丁二烯-苯乙烯（ABS）树脂的生产能力、供需状况和消费结构，预测了市场走势，对发展我国ABS树脂产业提出了几点建议。 - A kind of high flow and high-toughened flame retardant ABS resin was prepared by means of melt extrusion.
采用熔融挤出的方法制备了高流动、高韧性阻燃ABS。 - In this study, the reference value for the preparation of high-performance ABS resin.
本研究对于制备高性能的ABS树脂具有借鉴价值。 - Final experiment demonstrated that when particle size increases after PB latex, ABS resin, impact properties and tensile properties are significantly improved, modified to obtain better results.
最终实验证明了，当PB胶乳粒径增大后，ABS树脂的冲击性能和拉伸性能有明显的提高，获得了较好的改性效果。 - The development of ABS resin copolymer based on PS modification. It shows synergy properties of acrylonitrile-butadiene-styrene.
ABS树脂是在聚苯乙烯改性的基础上发展起来的三元共聚物，它体现了三种组分丙烯腈-丁二烯-苯乙烯的协同性能。 - Investigation on the preparation method of transparent ABS resin has important academic and applied values.
研究透明ABS树脂的制备方法具有重要的理论意义与实际价值。 - Synthetic ABS resin powder grafted with SAN blends.
接枝后的粉料与SAN共混合成ABS树脂。